FEATURES

KEY FEATURES

Pre-chamber and short silencers

Pre-chamber and short silencers

Using an under-engine pre-chamber enables smaller-volume silencers, contributing to both mass centralisation and a more concentrated styling. New silencer end-cap design adds to sporty looks.

Intoxicating Intake Howl

Intoxicating Intake Howl

Designed specifically so that acceleration could be enjoyed aurally as well as physically, the carefully crafted auditory note of the intake is a key component of the street riding exhilaration offered by the Z1000.

Larger-volume fuel tank

Larger-volume fuel tank

New fuel tank design increases fuel capacity to 17 litres, offering a greater touring range.

Idealised Riding Position

Idealised Riding Position

An idealised riding position sees the front lowered and the rear raised, creating a more aggressive posture. The more aggressive position matches the bike’s more direct throttle response and handling, putting riders in a position to fully capitalise on the Z1000’s sportier street riding potential.

Sugomi Design

Sugomi Design

The Japanese word sugomi describes the intense aura or energy given off by a person or object of greatness and felt by the viewer. Someone, or something, possessing sugomi inspires awe, leaves an indelible impression, is daunting in stature or ability, and commands respect. In the new Z1000, sugomi is evident both in its fiercely intense design and the exhilarating performance it delivers, radiating as a palpable energy. Idealised dimensions (lower front, raised rear) and all-new tight-fitting bodywork capture the essence of a predator crouched and ready to pounce. The lean, muscular styling hints at the Z1000’s more direct, sporty street riding performance

Aluminium twin-tube frame

Aluminium twin-tube frame

The highly rigid aluminium frame features a high degree of mass centralisation, creating a balance between sharp turning and firm handling. Lightweight and highly rigid, the frame uses the engine as a stressed member. The frame offers a firm, planted feeling, good stability and light, nimble turning. The frame is a 5-piece cast aluminium construction, consisting of steering stem, left and right main frames, and two cross pieces. The two main frame components have open C-shaped cross sections and were die-cast to ensure a smooth surface finish.

LED headlamp

LED headlamp

The thin, compact headlamp cowl was positioned as low as possible, extending the line that starts from the top of the tank. This is first time for Kawasaki to use the reflector-less LED headlamp design. Using LED lamps allows the design to be thin, the shape contributing to the more intense glare of the new Z1000’s face, and the reflector-less design further enhances its predatory appearance. There are four long-life, low-energy LED bulbs: two low-beam (centre), two high-beam (outside). All four bulbs light up when the high-beams are on. A separate LED position lamp is located on the meter cover

Die-cast Mirrors

Die-cast Mirrors

New mirrors have a sharper design that contributes to the aggressive image. Die-cast mirror stays contribute to a less plastic, higher quality feel of the cockpit.

Sugomi Livery

Sugomi Livery

Taking Kawasaki's naked bike design approach to the next level, the Z800 Sugomi Edition have matching front fork, tank graphics and passenger seat highlights, for a unique stand-alone look. 

Mass Centralisation

Mass Centralisation

The exhaust system (with large pre-chamber and short silencers), Horizontal Back-link rear suspension and the use of downdraft throttle bodies are the greatest contributors to mass centralisation. The Horizontal Back-link rear suspension arrangement frees up space taken up by the Uni-Trak suspension lower linkage, enabling a larger pre-chamber, which in turn allows the use of shorter mufflers and contributes to mass centralisation. The lightweight aluminium rear frame also contributes. The result is light, sharp handling.

Radial-mount monobloc calipers

Radial-mount monobloc calipers

High-performance brake package includes triple petal discs, radial-mount monobloc calipers and radial-pump front brake master cylinder. The new monobloc calipers and new brake pad material contribute to a stronger initial bite, superb brake feeling and formidable stopping power. Models with ABS also available. 

Downdraft throttle bodies

Downdraft throttle bodies

In addition to contributing to performance, downdraft throttle bodies contribute to overall mass centralisation. Revised intake funnel length contributes to a stronger mid-range response.

Cool Air system

Cool Air system

With the airbox nestled between the frame beams, intake air can be affected by engine heat. The Cool Air system routes cool air to the airbox from ducts at the front of the side fairings, minimising performance loss due to heated intake air. This should not be confused with Ram Air, where force-fed air becomes pressurised in the airbox.

LED taillight

LED taillight

New LED taillight design adds a futuristic touch to the bike’s rear

Instrumentation

Instrumentation

The Z1000’s compact instrument cluster is mounted directly to the handlebar, which added to design freedom and helped realise the compact headlamp cowl. Its low position creates an unobstructed view of the road ahead. The futuristic design of the LED tachometer and LCD screen reflects the sport potential of the new Z.

1,043 cm3 liquid-cooled, 4-stroke In-line Four

1,043 cm3 liquid-cooled, 4-stroke In-line Four

Powerful engine pulls strongly from all rpm and does not let up before the redline. Adding to rider exhilaration, the engine delivers superb response, a strong mid-range hit and an intoxicating intake howl. More direct response thanks to new engine settings and shorter gearing adds to the Z1000’s sporty street riding potential.

Separate Function Fork - Big Piston (SFF-BP)

Separate Function Fork - Big Piston (SFF-BP)

The more direct handling of the new Z1000 can be largely attributed to its new suspension. The new SFF-BP achieves both comfort and sport potential ideal for street riding. potential ideal for street riding. Combining the concepts of Showa SFF and BPF, the new fork features springs on both sides, with preload adjustability in the left tube and damping duties in the right tube.

Lightweight wheels

Lightweight wheels

Supersport-style wheels are approximately 1.5 kg lighter, reducing unsprung weight and contributing to lighter handling.

Aluminium fat bar

Aluminium fat bar

Ideally suited to the Supernaked character, the wide-set fat bar facilitates rider control.The wide aluminium fat bar features a brushed finish and a black alumite1 coating.

TECHNOLOGY

ABS

ABS

ABS (Anti-lock Brake System) ensures stable braking performance by preventing wheel lock during braking.

DISCOVER MORE
Horizontal Back-link Rear Suspension

Horizontal Back-link Rear Suspension

Horizontal Back-link Rear Suspension arranges its shock unit horizontally, greatly contributing to efficient use of space and mass centralisation.

DISCOVER MORE
Assist & Slipper Clutch

Assist & Slipper Clutch

Based on racing technology, the Assist & Slipper Clutch acts as both a back-torque limiter and a self-servo mechanism that enables a lighter clutch lever pull.

DISCOVER MORE
Dual Throttle Valves

Dual Throttle Valves

Dual Throttle Valves offer increased power and greater ease of use care of a second set of ECU-controlled throttle valves.

DISCOVER MORE
Economical Riding Indicator

Economical Riding Indicator

The Economical Riding Indicator is a mark appearing on the instrument panel to indicate favourable fuel consumption, encouraging fuel efficient riding.

DISCOVER MORE